Concrete footings in Chico CA - a solid start for whatever you build on top
Need footings under a new addition, deck or building? We measure, form and pour them so what you build sits on firm concrete.

I measure every footing job myself
I come out myself to look at each job, take the measurements and write the estimate. Our crew of finishers and laborers then builds what I wrote down, so the footing in the ground matches the one on paper.
Pouring concrete since 2013
We've been forming and pouring concrete for 13 years. I started on the sales side writing quotes before I moved to forming and finishing, which is why our estimates spell out each step instead of one lump line.
Licensed and fully insured on every job
The work is backed by our satisfaction guarantee. When you're ready, call (530) 399-1528 or send the estimate form with your address, what you're building and any plans you have, so I come out ready to measure.
Concrete footings for Chico projects
Concrete footings are the poured concrete base under a new building, an addition, a deck or a wall, so the weight above has a firm, even place to rest. We form, pour and finish footings in Chico for homeowners and property owners starting something new.
Most footing calls start with a project, like an addition, a deck or a new building that needs something firm under it. The price moves with how many footings your plans show and how much concrete and steel goes in them, how easily a crew and a concrete truck can reach the spot, and how much dirt has to come out. Your written estimate lists each step behind your number.
The schedule turns more on the city than on our crew. When a job needs a permit, we work out which office handles your address and take care of the application and inspections with you. Skipping it costs more in Chico, since work started without a required permit still needs one, can carry fees up to triple the usual amount, and may have to be uncovered for inspection. We're based in Chico and work across the cities around it.
Concrete footings and the work around them
Plans in hand before we dig
Before we dig, I want to know exactly what the footing has to carry, so I ask for your plans at the estimate. If your design isn't standard, we want the engineer's or architect's plans in hand first, because the city requires any foundation that departs from the standard design in the state building code to carry a registered engineer's or architect's seal and supporting calculations. It's also fair to ask which footing type suits your project, a thickened edge on a slab, a continuous footing under a wall, or a single pad under a post.
Clean trenches, steel and the inspection
The trench and the steel are hidden once the walls go up, which is why they're the first thing people want to trim. I'd rather trim somewhere else, because a footing set on loose, raked-in dirt can settle right along with it. We dig to firm ground, set the forms square to the layout and tie the rebar, the steel bars that help the footing carry weight. Then we plan the pour around the inspection, so nothing gets covered before it's been checked.
Pour day, tie-ins and older concrete
National concrete guidance says hot-weather trouble mostly shows up in summer, and heat and dry air do more harm as the wind picks up, so if your pour lands in July, ask me how we'd handle a hot, windy day. When a new footing has to meet an existing slab or patio, our concrete cutting work saws a clean opening instead of breaking out more than we need. If the older part of the house has settled, foundation raising can bring it back toward level so old and new line up.
Get a written footing estimate, every step listed
We reply within one business day to set a time, and I come out myself for a free on-site estimate with no obligation. Have your address, the project type and any plans ready so I can price it right.
(530) 399-1528How a footing job runs with us
I measure and write it up
After you call, I come out, measure, take photos and ask how you'll use what goes on top of the footing. Then we send a written estimate that lists each step, from digging and forms to steel, concrete and cleanup.
Permit office and pour date
If a permit is part of the job, we find out which city or county office handles your address before we set a date. That way the inspection is on the calendar first and the concrete order follows it.
Crew pours, then we walk it
Our crew does the prep, forming, pour and finish. Before we call it done, I go over the work with you against the written estimate, step by step, so what we built is what we wrote down.
Concrete footing questions in Chico
Do concrete footings need a permit in Chico?
Plan on a permit when the footing is for new construction, an addition, a deck or most retaining walls, since the City of Chico issues building permits for those projects. Its no-permit list includes retaining walls up to 4 feet tall from the footing's bottom that don't support a building, a fence or certain liquids. For anything else, ask the city.
When does the city inspect a concrete footing in Chico?
On a permitted job, city staff inspect before any concrete goes in and before anything that will end up hidden gets covered. The pour waits until that inspection is done, so your pour date follows the inspector's visit. If the inspection moves, the concrete order moves with it.
Does my Chico project need a soil report before footings go in?
New buildings in Chico need a soil investigation by a registered soil or civil engineer. Additions and remodels normally go without one, depending on how big they are. That rule comes from the city's plan submission requirements, so check the current list with the city, or with your own permit office if you're outside city limits.
Can an unlicensed worker pour my footings in Chico?
Usually not, because California only lets unlicensed workers take minor jobs where the whole contract, labor and materials included, is less than $500, and that exemption ends when the work is part of a larger project. Chico also requires contractors to carry a current city business license and a current state contractor's license, and the state's concrete class covers forming, pouring, placing and finishing.
