Concrete driveway building in Chico CA - a slab built for what you park
Old driveway cracked, sinking or holding water? We dig out, pack the base and pour a new slab sized for what you park on it.

I measure every driveway myself
I come out myself to look at each job and write the estimate, so the person who measured your driveway is the one answering your questions. Our crew of finishers and laborers then builds what I wrote down.
In business since 2013
We've been in business since 2013. I started in this trade writing quotes and walking jobs with customers, so our estimates spell out what's included, and we're known for work that matches them.
Licensed and fully insured
California only lets someone without a license take small jobs under $1,000 that need no permit and no hired help, so it's fair to ask any driveway contractor for theirs. Call (530) 399-1528 or use our estimate form to start.
Concrete driveway building in Chico
Concrete driveway building is digging out the old surface or bare ground, forming the edges, then pouring and finishing a new slab for your house. It's for Chico homeowners whose driveway is cracked, sinking or holding water, or who need room for another vehicle.
What moves the price is mostly size, how thick the slab has to be for what you park, whether an old driveway gets broken out and hauled off, and whether we add rebar, the steel set inside the slab that helps hold it together if it cracks. Concrete has usually cost more up front than asphalt, though that gap has narrowed, and what the extra buys you is a longer-lasting driveway.
What moves the schedule is mostly the permit for the part where your driveway meets the street, which we sort out before we set a pour date, and the weather on pour day. Breaking out an old driveway first adds time too. For your own figure, I measure on site and we send a written estimate that lists each step, so you know what's included before anything gets dug up.
Building a concrete driveway from the ground up
Planned around what you'll park
Before anything else, I ask what you'll park on the driveway, because a work truck or an RV changes the plan from the first measurement. Heavier loads call for a thicker slab and often rebar, and that's far easier to plan now than to fix after the pour. If you're thinking about a concrete patio or more parking down the road, tell me then, so we can lay out the forms and slopes to meet it cleanly later.
The base gets the budget first
What decides how a driveway holds up is the subgrade, the ground the slab sits on, and nobody sees it after pour day. A base that's only raked level settles along with the dirt, so we dig it out and pack it firm. If the budget has to come down, I'd trim the finish before the base, because a plain slab on solid ground outlasts a fancy one on soft ground. We also check where water runs, so the slab falls away from your house instead of toward it.
Joints that decide where cracks go
Will the new slab crack like the old one? Concrete shrinks as it hardens, so some cracking is normal, and the real job is deciding where it happens. We cut control joints, shallow grooves that give the slab a planned line to crack along, and we cut them on time, because joints cut late or skipped leave cracks wherever the slab picks. On top, most driveways get a broom finish, a light dragged texture that gives tires and shoes grip when it's wet. For a pattern or color instead, look at stamped concrete.
Get a written estimate for your new driveway
We reply within one business day to set up your free on-site estimate, with no pressure and no obligation. Include your address, rough size in square feet, what you'll park and whether an old driveway comes out.
(530) 399-1528How a Chico driveway job goes
I measure and write it up
After you call, I come out, measure, take photos and ask how you'll use the driveway. Then we send a written estimate that lists each step, from tear-out and base to pour and finish, so you can compare it line by line.
Permit first, then a date
If a permit is part of the job, we find out which city or county office handles your address before setting a date. In Chico, the city aims to review a complete application within 10 business days, though bigger or incomplete ones take longer.
Prep, pour and walk-through
Our crew does the digging, base, forms, pour and finish. Before we call it done, I walk the driveway with you against the written estimate, so you can see that what we wrote down is what we built. It's backed by our satisfaction guarantee.
Concrete driveway questions from Chico
How much does a concrete driveway cost in Chico, CA?
A concrete driveway in Chico usually costs about $7 to $13 per square foot, not counting removal of an old driveway. That's the usual price around here, not our quote. Your own number comes on the estimate after I measure, with each step listed so you can see what's included.
Do I need a permit for driveway work at the street in Chico?
Yes, for work in the public right-of-way along the street. The City of Chico requires an encroachment permit for it and has a standard design for the approach where your driveway meets the street. Butte County requires one on county right-of-way, typically with an inspection before work and a final after. We handle the application and inspections with you.
How thick should a concrete driveway be for a truck or RV?
Most driveways are four to five inches thick, typically enough for ordinary cars, and a local cost guide suggests six to eight inches for trucks or RVs. Poor ground under the slab can call for more thickness, because the subgrade shapes how long a slab lasts. I set the thickness after asking what you'll park and looking at your ground.
Is summer a good time to pour a concrete driveway in Chico?
Yes, with planning, since heat, dry air and wind are hard on fresh concrete and mostly line up in summer. We plan the pour to miss midday heat, which can leave a weak, dusty top. Older hot-weather guidance says curing, keeping the slab from drying too fast, should start once finishing is done and last at least 3 days.
