Groundwork Chico ConcreteGroundwork Chico Concrete

Concrete floor installation in Chico CA - a slab ready for the flooring you choose

Adding a room or replacing a worn slab? We plan the base, moisture protection and joints around the flooring you'll lay, then pour.

Close view of a patterned light gray concrete patio with a dark border and steps to a sliding door.

I write every estimate myself

I come out myself to look at each job and write the estimate, and our crew of finishers and laborers does the work. That means what's on paper comes from someone who stood in your room, not a guess over the phone.

Pouring concrete since 2013

We've been in business for 13 years. I started out writing quotes and walking jobs before I learned forming and finishing from finishers I'd worked beside, which is why our estimates spell out each step.

Licensed and fully insured

The City of Chico asks contractors applying for their first permit there for a California contractor's license number and a city business license number. Call (530) 399-1528 or use our estimate form to set up a visit.

Concrete floor installation in Chico, CA

Concrete floor installation means forming, pouring and finishing a flat slab inside a room, addition or shop, to stay as bare concrete or to take carpet, tile or wood later. At Groundwork Chico Concrete, we plan each one around what goes on top.

A new floor usually comes with a room addition, a shop build-out or a slab that's cracked or sunk too far to keep. The first decision is the flooring that goes on top, and it's made before the pour, since carpet, tile or wood changes how we protect the slab from moisture. Price mostly moves with the room's size, the slab thickness and how much digging and base work the ground needs.

Inside an existing building, getting concrete to the room can take a pump or a lot of wheelbarrow trips, and that shows up in both the price and the day. The schedule turns on whether your job needs a permit, the weather on pour day and how long the slab needs to cure and dry before flooring goes down. Your written estimate lists each step, so you can see what's included before you decide.

Concrete floors and the work around them

Digging out and packing the base

If the budget gets tight, I'd rather spend it on the base than the finish, because once it's buried under concrete, nobody can fix it. We dig out and pack the subgrade, the ground the slab sits on, instead of raking dirt level. Much of the level ground around Chico has soil that can swell and shrink with moisture, so I'll go over how the slab plan suits your lot. Where a floor meets the outside, like a pool house opening onto a concrete pool deck or a door that needs concrete steps, we set heights so water runs away from the house.

Moisture protection matched to your flooring

Tell us what flooring goes on top before we pour, because that decides how we protect the slab from moisture coming up from the ground. For carpet, tile or wood, a national floor construction guide says the greatest protection comes from setting the vapor barrier, a plastic sheet that blocks ground moisture, directly against the bottom of the slab. The concrete industry's trade group counts the minor cracking that can come with that setup as a smaller risk than flooring failure, and I'll go over that trade-off with you before we choose.

Joints and steel planned before the pour

I'll show you where the joints go and why before anything is poured. Control joints are grooves we cut into the slab so that when it shrinks and cracks, it does it along a straight line we picked instead of across your room. We cut them soon after the pour, because a late joint can't steer a crack that has already started. Where the floor calls for rebar, the steel set inside the slab to hold it together, it goes where the estimate shows. The work is backed by our satisfaction guarantee.

Get a written estimate for your new floor

We reply within one business day to set a time, and I come out to look at the room myself. The estimate is free, done on site and in writing, with no obligation to go ahead.

(530) 399-1528

What to expect on a Chico floor job

  1. Measurements and a written estimate

    Call (530) 399-1528 or send the form with your address, the room size and the flooring you plan to use. I come out, measure, take photos and ask how you'll use the room, then we send a written estimate listing each step.

  2. Permit sorted before a date

    If the floor needs a permit, we work out which city or county office handles your address before we set a date, then take care of the application and inspections with you. Before pour day, please clear the room and the way in.

  3. Prep, pour and final walk-through

    Our crew does the prep, forming, pour and finish, and on hot days we aim to pour early so the top doesn't dry too fast and turn weak. Before we call it done, I go over the floor with you against the written estimate.

Concrete floor questions in Chico

Will my new concrete floor crack?

Some cracking is normal, because cracks in concrete can't be prevented entirely, but well-planned joints control where they form and keep them small. Floor construction guidance says to expect some random cracking even with joints set close together, and that reinforcement sized and placed right should keep those cracks tightly closed.

Do I need moisture protection under tile or wood floors?

Yes, the concrete industry's trade group says a slab needs protection from rising moisture when carpet, tile or wood will cover it. Water vapor in the concrete can make flooring glue fail, leaving lifted or discolored flooring, trip hazards and possibly mold and odors. The slab should also be cured and allowed to dry before it's tested for moisture.

Who issues building permits in Chico, CA?

The City of Chico Building Division issues building permits in the city, and its staff does the plan check and inspections. Butte County's Building Division runs permitting, plan review and inspection for the county, so the office depends on your address. We work across the cities around Chico, so if yours isn't on our list, call and ask.

How soon can I walk on a new concrete slab?

You should be able to walk on it within 48 hours, according to a cost guide written for Sacramento, though concrete takes a month to fully cure. Curing is the slow hardening that keeps going after the pour, which is why the same guide adds that waiting a week before heavier loads may be safer.